1)Auto reconnect Once the controller have been connected to the device just press the Home buttonabout 2 seconds and the controller will be reconnected to your device automatically the handset can only be connected to the nearest device. If other devices are used connect the handset to the nearest device according to the instructions. 2)Sleep / Shutdown The gamepad will automatically go to sleep after 15 minutes without any operation. If you need to use it again press the HOME button.Wake up handle for operation;Press the pairing button on the gamepad for 2 seconds to tum off the device 3)Charging When the handle is charging 1-4LED flashes slowly according to the power condition and the LED lights are all steady on after being fully charged; in wired mode the current LED blinks slowly and the current LED is steady on when fully charged. When the handle is turned on the electric quantity is displayed by the number of LED lights (1:25% 2:50% 3:75% 4:100%). * Display power is approximate power display time is about 2 seconds 4)Low battery When the battery on the handle is low the current mode indicator blinks indicating that it needs to be charged. When the power is too low it will automatically shut down. After recharging it can be turned on and used normally. (it is recommended to charge it every 30 days when it is not used for a long time) 5)Sensor When the handle is charging 1-4LED flashes slowly according to the power condition and the LED lights are all steady on after being fully charged; In wired mode the current LED blinks slowly and the current LED is steady on when fully charged When the handle is turned on the electric quantity is displayed by the number of LED lights (25% 50% 75% 100%) * Display power is approximate power display time is about 2 seconds